JUMPBIT
Open app

6 min read

How to create a Raydium liquidity pool: CPMM vs CLMM and Burn & Earn

How to create a Raydium liquidity pool: CPMM takes token and SOL and costs about 0.18 SOL with Raydium's 0.15 SOL fee; CLMM takes your token only and costs 0.10 to 0.16 SOL. Fee tiers, the 84/12/4 split, Token-2022 rules and Burn & Earn explained.

Raydium gives you two ways to create a pool for a new token. A CPMM pool takes your token and SOL across the full price range, and costs Raydium's 0.15 SOL creation fee plus about 0.031 SOL in rent. A CLMM pool takes only your token, placed in a price range above your starting price. It has no Raydium fee and costs 0.10 to 0.16 SOL in rent. On both, liquidity providers keep 84% of the trading fees.

If you want holders to know the liquidity can't be pulled but still want your fees, Raydium's Burn & Earn locks it permanently and hands you an NFT that collects the fees. You can create either pool type on Jumpbit's pool creator for a flat 0.05 SOL.

Which Raydium mistakes cost the most?

The expensive one is paying the 0.15 SOL fee for a pool that splits your liquidity. A pair can have one CPMM pool per fee tier, so if one already exists, a second pool divides buyers between two thinner pools, and you've paid Raydium twice.

The second is getting the starting price wrong. Raydium's own docs point out that there's no simple reset. If your price doesn't match the market, arbitrage bots take the difference in the first few trades.

The third is choosing AMM v4 out of habit. It's Raydium's older pool type. Raydium now points new pools to CPMM, and AMM v4 doesn't accept Token-2022 tokens at all.

The last one is quieter: losing your Burn & Earn Fee Key. Whoever holds that NFT collects the fees, so if you lose it or send it to a wallet you can't access, the fees are gone for good.

Should you choose CPMM or CLMM?

CPMMCLMM
You depositToken + SOLToken only
Price rangeFull rangeYour range above the starting price
Starting priceSet by the ratio you depositYou type it
Fee tiers on Jumpbit0.25%, 1%, 2%, 4%0.05%, 0.25%, 1%, 2%
Raydium creation fee0.15 SOLNone
RentAbout 0.031 SOL0.10 to 0.16 SOL (1 or 2 tick arrays)
What you holdLP tokensA position NFT
How fees are paidThey build up in the pool and come out when you withdrawYou claim them separately
LockBurn & EarnBurn & Earn

CPMM is the plain, standard pool that most tools understand, and it's the right pick if you have SOL to pair with your token. CLMM suits you if you only have the token, or if you like the idea of buyers' SOL filling the pool as the price climbs through your range.

Both split fees the same way, whatever tier you choose: 84% to liquidity providers, 12% to Raydium's protocol and 4% to its fund.

How much does a Raydium pool cost?

ItemCPMMCLMM
Pool setup rent0.0293 SOL0.0449 SOL
Tick arraysNone0.053 SOL each, 1 or 2
Your position0.0015 SOL (LP token account)0.0067 SOL (position NFT accounts)
Raydium fee0.15 SOLNone
Jumpbit fee0.05 SOL0.05 SOL
Total before depositAbout 0.23 SOLAbout 0.15 to 0.21 SOL

You get your position rent back when you withdraw everything and close the position. The setup and tick array rent stays with the pool. Whether a CLMM range needs one tick array or two depends on whether it crosses a boundary, and the preview tells you before you sign.

Raydium's own pages suggest budgeting about 0.2 SOL for a CPMM pool and about 0.3 SOL for a CLMM pool. Our CLMM figure is lower because Solana's rent has come down since those pages were written. The full method is in what it costs to create a pool on every DEX.

Can you use a Token-2022 token on Raydium?

Yes, with limits. CPMM and CLMM accept Token-2022 tokens that use only these extensions: transfer fee, metadata pointer, token metadata, interest-bearing and scaled UI amount. Raydium rejects anything else when you create the pool, including transfer hooks, permanent delegates, non-transferable tokens and default account state. A plain SPL token always works. If you haven't made your token yet, read SPL token vs Token-2022.

How do you create a Raydium CPMM pool?

Start by revoking your token's mint and freeze authority. See how to revoke mint and freeze authority.

Open create pool, choose Raydium CPMM and load your token. If a pool already exists for the pair, the form flags it. Pick a fee tier. 0.25% is Raydium's default, and higher tiers earn more per trade but make every buy more expensive.

Enter the token and SOL amounts. The preview shows the starting price and market cap, and if the token already trades, it fills in the market price for you. Check the "Where your SOL goes" breakdown, which includes the 0.15 SOL Raydium fee, then approve. The transaction is simulated before your wallet opens.

How do you create a Raydium CLMM pool?

The preparation is the same. Then choose Raydium CLMM, load your token and pick a fee tier: 0.05%, 0.25%, 1% or 2%. Volatile new tokens often use 1% or 2%.

Type the starting price in SOL per token, or use the market price if the token already trades. Then choose how far above that price your range goes: +25%, +50%, +100% or +200%. As buyers come in, your tokens sell for SOL as the price climbs through the range. Enter the token amount, check the rent breakdown, which shows how many tick arrays your range needs, and approve.

Once the price goes past the top of your range, all your tokens have sold for SOL and the position stops earning until the price drops back into it. To keep selling higher, open a new position above it with add liquidity.

How does Burn & Earn work?

Burn & Earn is Raydium's permanent lock. You put in your CPMM LP tokens or your CLMM position, and from then on it can never be withdrawn. In return you get a Raydium Fee Key NFT, and whoever holds that Fee Key can claim the trading fees for as long as the pool trades.

It works on CPMM pools and on CLMM positions, though Raydium recommends using it on full-range CLMM positions. AMM v4 isn't supported. A single position can't be partly locked, but on Jumpbit you can lock 25%, 50%, 75% or 100% of your CPMM LP tokens. The Fee Key is transferable, so treat it like any valuable NFT.

You can lock on Jumpbit's lock page and claim the fees on claim fees. If you'd rather give up the fees and burn the liquidity outright, see how to lock or burn liquidity.

Is Raydium the right DEX for your pool?

With its 0.15 SOL fee, a Raydium CPMM pool costs about ten times more to open than most full-range pools on Solana. Meteora DAMM v2 takes the same token and SOL deposit, costs about 0.018 SOL in rent and can lock the liquidity while it creates the pool. Orca Whirlpool gives you a one-sided range pool for about 0.015 SOL. Raydium is still the right choice when your holders or the tools they use expect a Raydium pool, or when you want Burn & Earn. Compare them all in PumpSwap vs Raydium vs Meteora vs Orca, or from a trader's point of view in Orca vs Raydium and Meteora vs Raydium.

How we checked

The fee tiers, the 0.15 SOL creation fee and the 84/12/4 split come from Raydium's live CPMM and CLMM configs (api-v3.raydium.io/main/cpmm-config and clmm-config), read on 22 November 2026, and match Raydium's fee comparison docs. The Token-2022 rules and Burn & Earn details are from Raydium's docs, read the same day. Rent comes from creating both pool types through the Jumpbit form on a copy of mainnet, priced at 5,080 lamports per byte.

Questions

How much does it cost to create a Raydium pool?

A Raydium CPMM pool costs the 0.15 SOL Raydium fee plus about 0.031 SOL in rent. A CLMM pool has no Raydium fee and costs 0.10 to 0.16 SOL in rent. Jumpbit adds 0.05 SOL per pool.

What is the difference between Raydium CPMM and CLMM?

CPMM takes both tokens across the full price range and gives you LP tokens. CLMM holds liquidity in a price range you choose, so you can deposit your token only, and gives you a position NFT.

Can I create a Raydium pool without SOL?

Yes, with CLMM. Your tokens sit above the starting price and buyers bring the SOL. You still pay about 0.10 to 0.16 SOL in rent.

What fee tier should I pick on Raydium?

0.25% is Raydium's default for CPMM. Volatile new tokens often use 1% or 2%. A higher tier earns more per trade but makes buying more expensive.

How much of the trading fee do Raydium liquidity providers get?

84% on CPMM and CLMM pools. Raydium's protocol takes 12% and its fund 4%.

What is Raydium Burn & Earn?

A permanent lock for CPMM LP tokens and CLMM positions. The liquidity can never be withdrawn, and a transferable Fee Key NFT keeps the right to claim its trading fees.

Does Raydium support Token-2022 tokens?

CPMM and CLMM do, if the token uses only the transfer fee, metadata pointer, token metadata, interest-bearing or scaled UI amount extensions. AMM v4 doesn't support Token-2022.

Should I use Raydium AMM v4 for a new pool?

No. AMM v4 is Raydium's legacy pool. Raydium points new pools to CPMM, and AMM v4 doesn't accept Token-2022 tokens.

More guides

All 88 →