JUMPBIT
Open app

6 min read

How to create a PumpSwap liquidity pool: costs, fees and LP burn

How to create a PumpSwap liquidity pool for any Solana token. It costs about 0.0077 SOL in rent, trades pay 0.30% (0.25% to LPs, 0.05% to the protocol, 0% to a creator), it works differently from a graduated pump.fun pool, and burning the LP is your only lock.

PumpSwap is pump.fun's own DEX, and you don't need a pump.fun coin to use it. Any token can have a PumpSwap pool. You deposit your token and SOL, the ratio between them sets the starting price, and the pool costs about 0.0077 SOL in rent, less than any other pool on Solana. Every trade in your pool pays a 0.30% fee: 0.25% goes to liquidity providers, 0.05% to the protocol, and nothing to a creator.

You can create one on Jumpbit, add a dev buy in the same go, and then burn the LP so holders can see the liquidity will never be pulled.

Why create a pool on PumpSwap?

Mostly because of who's already there. Every pump.fun coin that graduates moves into a PumpSwap pool, so the traders and terminals that follow pump.fun coins watch PumpSwap first. It's also the cheapest pool to open and the simplest to set up. There's one pool type, no price range to choose and no fee tier to pick.

The trade-off is locking. PumpSwap has no lock that keeps paying you fees. The only way to make the liquidity permanent is to burn the LP tokens, and that gives up your share of the trading fees for good. If a fee-paying lock matters to you, Meteora DAMM v2 or Raydium are better fits.

How is your pool different from a graduated pump.fun pool?

PumpSwap has two kinds of pool, and the fees work very differently.

When a pump.fun coin graduates, pump.fun creates its "canonical" pool automatically. That pool's fee starts at 1.25% while the market cap is under 420 SOL and falls in steps to 0.30% once it passes 98,240 SOL. Part of that fee goes to the coin's creator: 0.30% at the lowest tier, up to 0.95% just above it, then down to 0.05% at the top. The liquidity belongs to the protocol and is never removed.

A pool you create yourself is "non-canonical". It charges a flat 0.30% at every market cap, split 0.25% to liquidity providers and 0.05% to the protocol, with 0% for a creator. You hold the liquidity as LP tokens.

So on your own pool you earn as a liquidity provider, not as a creator. If you hold all the LP, the whole 0.25% is yours. It builds up inside the pool, and you collect it when you withdraw.

If your coin already graduated from pump.fun, it already has a canonical pool, and a second one would only split the liquidity. Add to the existing pool or leave it be. The Jumpbit form flags existing pools as soon as you load the token.

How much does a PumpSwap pool cost?

ItemAmountDo you get it back?
Pool setup rent (LP mint, two vaults, pool account)0.0062 SOLNo
Your LP token account0.0015 SOLYes, if you withdraw everything and close it
PumpSwap creation feeNone
Jumpbit fee0.05 SOLNo
Network feesA fraction of a centNo
Your depositUp to youIt stays in the pool as your position

That's about 0.058 SOL in total on Jumpbit before your deposit. To see how this compares with the other DEXes, read what it costs to create a pool on every DEX.

How do you create a PumpSwap pool?

First, revoke your token's mint and freeze authority. Rug checkers flag both, and buyers look for them. See how to revoke mint and freeze authority.

Then open create pool, connect your wallet and choose PumpSwap AMM. Paste your token's mint or pick it from your wallet. If a PumpSwap pool for the pair already exists, the form tells you and offers to add liquidity instead.

Enter how many tokens and how much SOL to deposit. The preview shows the starting price, which is SOL divided by tokens, and the starting market cap. If the token already trades somewhere, the form fills in the market price from Jupiter and works out the SOL side for you.

You can also turn on a dev buy. That buys from the new pool with the same wallet, right after the pool is created. Check the "Where your SOL goes" breakdown, then approve. The transaction is simulated first, so one that would fail never opens your wallet. When it confirms, you'll get links to the pool on PumpSwap and on DEX Screener.

If you'd rather use a page that only does PumpSwap, there's one at PumpSwap liquidity.

How much SOL should you put in?

The more SOL you start with, the less each buy moves the price. With 1 billion tokens in the pool, a 1 SOL buy moves the price roughly like this:

DepositStarting priceStarting market capPrice move from a 1 SOL buy
1B tokens + 2 SOL0.000000002 SOL2 SOLAbout +125%
1B tokens + 10 SOL0.00000001 SOL10 SOLAbout +21%
1B tokens + 50 SOL0.00000005 SOL50 SOLAbout +4%

These come straight from the constant-product formula PumpSwap uses, before the 0.30% fee. A 2 SOL pool more than doubles on a single 1 SOL buy, which looks exciting on a chart and puts off careful buyers.

Should you burn the LP?

On PumpSwap, burning the LP tokens is the only way to make the liquidity permanent. Once they're burned, nobody can remove the liquidity, including you, and the 0.25% fees earned on that share stay in the pool for good. Holders and Rug Check can see the burn on chain, so nobody has to take your word for it.

You don't have to burn everything. You can burn part of it, say 90%, and keep the rest. Our guide on how to lock or burn liquidity covers the trade-off, and you can do it on burn LP. If you'd rather lock the liquidity and keep earning fees, compare the options in where to create your pool.

What do PumpSwap pool errors mean?

"No token account in this wallet contains enough tokens for the initial pool amount" means your tokens are spread across more than one token account, and PumpSwap takes the deposit from a single account. Move them into one account or lower the amount.

"Not enough SOL" means your deposit, the roughly 0.0077 SOL rent, the 0.05 SOL fee and network fees don't all fit in your balance. The preview shows each part.

"Pool already exists" means the pair already has a PumpSwap pool. Add liquidity to that one instead.

How we checked

PumpSwap's fee tiers and splits are from pump.fun's fees page, last updated 16 November 2026 and read on 22 November 2026. Rent comes from creating a PumpSwap pool through the Jumpbit form on a copy of mainnet, priced at the 5,080 lamports per byte mainnet rate on 22 November 2026. The price-move table uses the constant-product formula, and the form options are from the Jumpbit pool creator as of 22 November 2026.

Questions

Can anyone create a PumpSwap pool?

Yes. Any token can have a PumpSwap pool, not only graduated pump.fun coins. You deposit your token and SOL, and the ratio sets the starting price.

How much does it cost to create a PumpSwap pool?

About 0.0077 SOL in rent, and PumpSwap charges no creation fee. Jumpbit adds 0.05 SOL. Your deposit stays in the pool.

What fees does a PumpSwap pool charge?

A pool you create charges 0.30% per trade: 0.25% to liquidity providers, 0.05% to the protocol and 0% to a creator. Graduated pump.fun pools follow a different schedule, from 1.25% down to 0.30% as the market cap grows.

Do I earn creator fees on my own PumpSwap pool?

No. The creator fee on user-created pools is 0%. You earn the 0.25% liquidity provider share on your part of the pool instead.

Can I lock liquidity on PumpSwap?

Not with a lock that keeps paying fees. On PumpSwap you can burn the LP tokens, which makes the liquidity permanent and gives up its fees. Meteora and Raydium have locks that keep your fees.

What is a dev buy?

An optional buy from your new pool, made with the same wallet right after the pool is created.

My coin graduated from pump.fun. Should I create a PumpSwap pool?

No. It already has a canonical PumpSwap pool, and a second one would split the liquidity. Add liquidity to the existing pool if you want it deeper.

More guides

All 88 →